Material
Safety Data Sheet for Arbutin
|
Section 1:
Identification of substance |
Product
name:
Arbutin
CAS#:
497-76-7
Chemical
formula: C12H16O7
RTECS:
CE8863000
REACH
reference number: 05-2114278657-32-0000
Manufacturer/Supplier:
Name: Hubei
Artec Biotechnology Co.,Ltd.
Add.: Leiyan avenue, Leihe development area, Yicheng, Hubei,
441400, P.R.China
Http://www.artec.cc
http://www.arbutin.com
E-mail: artec@artec.cc
Tel.:
86-710-4393599
Fax.: 86-710-4394588
|
|
Section 2:
Composition/Data on components |
Composition:
4-Hydroxyphenyl-beta-D-glucopyranoside
(CAS#: 497-76-7): 100%
EINECS
number: 207-850-3
|
|
Section 3:
Hazards identification |
Hazard
description: Arbutin is hazardous in case of
eye contact (irritant).
Arbutin
is slightly hazardous in case of inhalation (lung
irritant).
Arbutin
is non-irritant for skin.
Information
pertaining to particular dangers for man and environment:
Not available
HMIS:
Health hazard: 1
Fire hazard: 1
Reactivity: 0
Personal protection: E
NFPA:
Health:
1
Flammability: 1
Reactivity: 0
|
|
Section 4:
First aid measures |
After
inhalation:
Supply
fresh air. If required, provide artificial respiration. Keep patient
warm.
Seek
immediate medical advice.
After
serious inhalation: Not available.
After
skin contact:
Wash
with soap and water. Get medical attention develops.
Cold
water may be used.
After
serious skin contact: Not available.
After
eye contact: Rinse opened eye for
several minutes under running water. Then consult a doctor.
After
ingestion: Do not vomiting unless
directed to do so by medical personnel. Never give anything by mouth
to an unconscious person. If large quantities of this material are
swallowed, call a physician immediately. Loosen tight clothing such as
a collar, tie, belt or waistband.
After
serious ingestion: Not available.
|
|
Section 5: Fire
fighting measures |
Suitable
extinguishing agents:
Carbon
dioxide, extinguishing powder or water spray. Fight larger fires with
water spray or alcohol resistant foam.
Special
hazards caused by the material, its products of combustion or
resulting gases:
In
case of fire, the following can be released: Carbon monoxide and
carbon dioxide.
Protective
equipment:
Wear
self-contained respirator.
Wear
fully protective impervious suit.
|
|
Section 6:
Accidental release measures |
Person-related
safety precautions:
Wear
protective equipment. Keep unprotected persons away.
Ensure
adequate ventilation.
Measures
for environmental protection:
Do
not allow arbutin to be released to the environment without proper
governmental permits.
Measures
for cleaning/collecting: Pick up
mechanically.
Additional
information:
See
Section 7 for information on safe handling.
See
Section 8 for information on personal protection equipment..
See
Section 13 for disposal information.
|
|
Section 7:
Handling and storage |
Handling:
Information
for safe handling:
Keep
arbutin container tightly sealed.
Arbutin
should store
in cool, dry place in tightly closed containers.
No
special precautions are necessary if arbutin used correctly.
Information
about protection against explosions and fires: Keep
ignition sources away.
Storage:
Requirements
to be met by storerooms and receptacles: No
special requirements.
Information
about storage in one common storage facility: Arbutin
must store
away from oxidizing agents.
Further
information about storage conditions:
Keep
arbutin container tightly sealed.
Arbutin
should store
in cool, dry conditions in well sealed containers.
|
Section 8 to Section 16 were omitted,
if necessary, please contact Hubei Artec
Biotechnology Co.,
Ltd.
|
|